Nut and Bolt Packing Machine
The automatic screw counting packaging machine, or similar hardware counting packaging machine, is specially designed to package regular subjects in furniture & electronic industry like bolts, screws, nuts, small hardware, small wood stick, plastic parts, etc...
Nut and Bolt Packing Machine
Mitsubishi PLC, wide vision operate screen in English, and any other languages as the user need;
Easily program setting, saving and storage ;
The Pneumatic works as the main power for the whole automatic packaging process;
Two hardware counting and filling models:
A.Mainly Automatically counting & filling by vibrating bowl with optical F&C fiber for general subjects;
Note: the counting bowl is always Customized as the user's real sample hardware
B. Manual feeding for a few of the special subjects.
Strong frame, stainless steel, open-design frame,
Minimal maintenance requirements,
Available End-seal cooling air;
Jaw obstruction detection;
Outputting setting, storage, and recording
The automatic screw counting packaging machine, or similar hardware counting packaging machine, is specially designed to package regular subjects in furniture & electronic industry like bolts, screws, nuts, small hardware, small wood stick, plastic parts, etc.
Automatic packing machine Vs. Manual packing
Usually, one set of the automatic machine can replace at 8-10 workers. The net saving of the labor is 60-80% after reducing the machine operators.
Packing material cost
Usually, 40-60% packaging material cost saving.
The machine uses the film roll while you user has to use the pre-made bags under the manual packing model.
Automatic machine can control the error rate within 0.5-1% easily. However, the error rate under the manual model is very difficult to control because that depends on many unpredictable factors, even the worker's mood.
The whole automatic counting packaging system includes the following main parts:
automatic feeder(bucket, or belt)
automatically lift and feed the hardware items to the bowls
vibrating bowl with the counting fiber
automatically count and fill the hardware into the horizontal bucket conveyor
bowl support stand table
fix the bowls
automatically collect the hardware from the bowls,
and then convey &fill them into the bag former tube of the main packaging machine
automatically make the hardware bags
supply the power & also work as the controller heart of the whole system
complete alarm function, including alarm when the feeder needs to be loaded more items.
finished bags output conveyor
lift and convey the finished bags, into the check weigher, or case
check and delete the NG finished bags( less or more item quantity )
The main technical parameters of the vertical form fill seal machine
Counted & filled by
Vibrating feeders with the counting fiber
L 50-150mm W50-110mm
Main driven by
PLC + Chinese/English interface
1Phase,50Hz,AC 220V, /2.0KW
Different bag sizes:
1.Different bag width , different former , the bag width is adjustable by the former.
2.Different Bag Length: Can be set on the Machine Operate Interface.
Finished hardware item package: