Guangzhou CER Packing Machinery co., ltd

High quality product, professional service, being the core supplier in automatic packing machinery!

Home > Knowledge > Content
Normal Troubleshooting for Vertical Packing Machine
- Jun 14, 2018 -

Normal Troubleshooting for Vertical Packing Machine

We’re a professional Manufacturer and supplier of vertical packing machine,VFFS machine, vertical FFS packaging machine, powder packing machine, liquid packing machine, weigher filler packaging machine, weighing and packing machines to widely package many different products, such as granule, powder and liquid in the field of food, chemical, hardware, farm products and industrial products. Save money and labors, perfect stability, low maintenance, flexible and highly customize design, quickly parts and film changing design, CERPACK is to be your friend if you choose CERPACK.

Hereby, we’re glad to share some common problem & related solution for your vertical packing machine

F= Failure        R. = Possible reason        S = Possible solution

 Chapter 1

F1. No power

R1. Is the power plug connected to the power supply?

S1. Connect the power plug onto the power supply.

 Chapter 2

F2. Power on, but machine doesn’t start working.

R2. Is the power plug connected tightly and properly?

S2. Check and connect the power plug tightly and properly onto the power supply.

F3. Power on, but machine doesn’t start working.

R3: Is the “emergency-stop” pressed down?

S3: Check and release the “emergency-stop”


Chapter 3

F4. Though “emergency-stop” pressed down, machine doesn’t stop working.

R4. Machine program mistake

S4. Turn off power and restart.

 Chapter 4

F5. Machine stops working due to “eye-mark” detecting mistake.

R5. Is the “eye-mark” sensor set properly?

S5. Check and adjust the “eye-mark” sensor.

F6. Machine stops working due to “eye-mark” detecting mistake.

R6. Is the bag length setting correct?

S6. Check and confirm the bag length set is correct.

 Chapter 5

F7.  Temperature indicator doesn’t show temperature increasing

R7.  Is the heater working well?

S7.  Replace the heaters. 

F8.  Temperature indicator doesn’t show temperature increasing

R8.  Is the thermocouple broken?

S8. Replace new thermocouple

F9.  Temperature indicator doesn’t show temperature increasing

R9.  Temperature indicator is broken.

S9.  Replace new temperature indicator.

F10.  Temperature indicator doesn’t show temperature increasing

R10.  Is the fuse broken?

S10. Replace new fuse.

F11.  Temperature indicator doesn’t show temperature decreasing

R11.  Is the thermocouple loose?

S11.  Check and re-fix the thermocouple.

F12.  Temperature indicator doesn’t show temperature decreasing

R12.  Is the relay broken?

S12  Replace new relay.

F13.  Temperature indicator doesn’t show temperature decreasing

R13.  Is the thermocouple broken?

S13.  Check and replace the thermocouple.

 Chapter 6 

F14.  Film pulling motor doesn’t work.

R14.  Is the film pulling motor broken?

S14.  Check and replace new film pulling motor.

F15.  Film pulling motor doesn’t work.

R15.  Is the film-pulling proximity switch broken?

S15.  Check and replace new proximity switch

F16.  Film pulling motor doesn’t work.

R16.  Is the relay on power board broken?

S16.  Check and replace new relay.

F17.  Film pulling motor doesn’t work.

R17.  Any wire broken?

S17.  Check wire connections and fix.

 Chapter 7

F18.  Sealing is not tight enough.

R18.  Is the temperature set not high enough?

S18.  Check and set a higher temperature to try.

 F19.  Sealing is not tight enough.

R19.  Is the sealer matching well? Is the sealer pressure enough?

S19.  Check and adjust the sealer matching, and sealer pressure.

 

For more troubleshooting solutions, freely contact me by email of ray@cerpackingmachinery.com.